Page 48 - professional-catering
P. 48
/ Electronic controls
HYGIENE
AND INFECTION CONTROL
Opens/closes automatically, Energy savings
with no manual contact The electronic mixers and taps do not require much
DELABIE electronic mixers and taps are operated energy to operate. For battery-operated models,
by infrared active pulse detection. DELABIE has chosen infrared active pulse technology,
Flow opens when the detector senses hands a low-power consumption model.
Hygiene and infection control and shuts off automatically when hands are removed The infrared bean is emitted intermittently, saving
from the detection zone. energy while ensuring effective detection.
The absence of manual contact prevents the spread Battery-operated models have an average lifespan
of germs by hand. of 350,000 cycles (i.e. 3 to 6 years) depending on
the frequency of use. The Lithium batteries are widely
Anti-bacterial duty flush programme available, affordable and recyclable.
If a mixer or tap is not used for prolonged periods The exceptional hot water savings provided
of time, water stagnates in the pipework, which by DELABIE’s mixers and taps also result in energy
promotes bacterial development (e.g. isolated savings.
points-of-use, facilities closed during holidays, etc.).
DELABIE’s electronic mixers and taps have a duty Environmental labels
flush programme. The water and energy saving performance of
Reduced-stagnation solenoid An automatic flush takes place for approximately DELABIE’s electronic mixers and taps means that the
valve 60 seconds every 24 hours after the last use buildings achieve the highest performance standards
(programmable on some models). for international rating schemes such as LEED,
BREEAM or HQE.
Reduced-stagnation solenoid valve
Most solenoid valves on the market are fitted with
a rubber membrane behind which water stagnates SPECIFICALLY DESIGNED FOR
and is not renewed. This can lead to bacterial growth. COMMERCIAL ENVIRONMENTS
DELABIE has developed a technology without
a membrane (patented system).
With this piston-operated solenoid valve, water is Easy to install
drained and renewed with every use which reduces DELABIE’s products are easy to install and
niches where bacteria can develop. adjustments are kept to a minimum in order to save
No manual contact time during installation.
The solenoid valve’s self-cleaning system with a
calibrated groove reduces the build-up of impurities. • Independent electronic control unit:
Conventional DELABIE
mixer mixer It’s slow closure also eliminates water-hammer. BINOPTIC and TEMPOMATIC 2 models
9 lpm 3 lpm Depending on the model, the electronic control unit
0% 90% offers the option to adjust the presence detection
90% WATER distance, to change the operating mode (ON/OFF
AND ENERGY SAVINGS or automatic) and change the duty flush settings.
The electronic control units are waterproof with
diagnostic LEDs to facilitate servicing.
Water savings • Electronic unit and solenoid valve integrated
Compared to conventional mixers and taps, in the body of the mixer/tap*:
DELABIE’s electronic mixers and taps offer maximum TEMPOMATIC 4 model
water savings. They ensure the manager’s water bills Can be installed on any isolated point-of-use,
can be reduced whilst preserving user comfort. for new builds as well as renovation.
4.8L 0.6L • Automatic shut-off and split delivery - 6V Lithium batteries*:
The mixer or tap shuts off automatically when There are no electrical connections required.
32 sec 12 sec hands are removed from the detection zone. Simply connect the flexibles to the supply pipes
This removes the risk of waste through negligence. in the same way as for a conventional mixer/tap.
Water saving per use The anti-blocking security activates to prevent the No special adjustment is necessary, the mixer/tap
mixer or tap from flowing continuously. The flow is ready to operate independently for 3 to 6 years.
time is reduced to the minimum necessary (wetting, A red LED will flash to indicate that the battery life
rinsing). is low. The batteries can be changed without shutting
off the water supply or removing the mixer/tap.
• Flow rate regulated at 3 lpm
YEAR DELABIE’s electronic mixers and taps are regulated - 230/6V mains supply (plug in or recessed)*:
at 3 lpm, ensuring constant flow regardless of
To operate, simply connect the flexibles to the
pressure variations in the system. The flow rate can supply pipes and connect the electrical supply
WARRANTY be adjusted from 1.4 to 6 lpm. to the mixer/tap via a plug and socket or recessed
connection close to the basin.
This does not require any specific maintenance.
* Depending on model
30-year warranty against any manufacturing defects.
50 years repairability.
46 Non-contact controls

