Page 15 - HAND_WASHING_DISINFECTION

Electronic controls BINOPTIC /

• Water savings: 90%
• Hygiene: no manual contact, anti-bacterial duty flush, spout with smooth interior and low water volume
• Maintenance: LED diagnostic aids

BINOPTIC MIX BINOPTIC
Cross wall electronic basin mixer with mains supply

Electronic tap for recessed inlets or installation on walls
≤ 190mm

BINOPTIC MIX

• Independent IP65 electronic control unit.
• 230/12V mains supply with transformer.
• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1�5 - 6 lpm�
• Scale-resistant flow straightener.
• Adjustable duty flush (pre-set flush ~60 seconds every 24 hours after last use)� Recessed electronic mixer on stainless steel wall plate
• Active, infrared presence detection, sensor at the end of the spout
Ø 60
optimises detection� 1/2"
• Filters and solenoid valves� 70
• Chrome-plated brass body� 200 17
• Chrome-plated spout for cross wall installation ≤ 110mm�
• Cable L� 120mm for sensor, flexibles and mounting all pass through the same hole� 110x75x40 185x160 225x200
• Anti-blocking security� 240
• Spout with smooth interior and low water volume (reduces bacterial development)�
• Side temperature control with adjustable maximum temperature limiter� 110x75x40 14
• Suitable for people with reduced mobility�
• 10-year warranty�

110 max
Ø 15
379ENC15 379ECM
230
BINOPTIC wall-mounted tap
110x75x40
Recessed spout L� 200mm 379ENC
Recessed spout L� 200mm, 379ENC15
Ø 15mm for compression fittings
For walls ≤ 190mm, spout L� 205mm 379DER
For walls ≤ 190mm, spout L� 205mm, 379DER15
Ø15 Ø 15mm for compression fittings
For walls ≤ 190mm, spout L� 135mm 379D13
For walls ≤ 190mm, spout L� 135mm,
379MCH15 379D1315
Ø 15mm for compression fittings
BINOPTIC MIX cross wall mixer BINOPTIC MIX recessed mixer
M⅜" 379MCH Standard temperature control lever 379ECM
Ø 15mm for compression fittings 379MCH15 Long temperature control lever 379ECML
5m electrical cable available on request 5m electrical cable available on request
Options: factory pre-set at 1�4 lpm for environmental labels (add "LD" after the reference) Option: factory pre-set at 1�4 lpm for environmental labels
For long lever, please add "L" after the reference (add "LD" after the reference)

Hand washing and disinfection 15