Page 13 - HAND_WASHING_DISINFECTION
P. 13
Electronic controls BINOPTIC /
• Water savings: 90%
• Hygiene: no manual contact, anti-bacterial duty flush, spout with smooth interior and low water volume,
reduced-stagnation solenoid valves on the battery-operated versions
• Maintenance: LED diagnostic aids
BINOPTIC
Electronic basin tap/mixer, mains supply or battery-operated
• Independent IP65 electronic control unit.
• 230/12V mains supply with transformer or 123 6V Lithium batteries.
• Flow rate pre-set at 3 lpm at 3 bar, can be adjusted from 1�5 - 6 lpm�
• Scale-resistant flow straightener.
• Adjustable duty flush
(pre-set flush ~60 seconds every 24 hours after last use)�
• Active, infrared presence detection, sensor at the end of the spout optimises detection�
• Chrome-plated brass body� Fixing reinforced by 2 stainless steel rods�
• PEX flexibles with filters and solenoid valves Ø 15mm for compression fittings�
• Anti-blocking security�
• Spout with smooth interior and low water volume (reduces bacterial development)�
• Side temperature control with adjustable maximum temperature limiter and long lever on mixers�
Two drop heights available depending on the choice of basin:
170mm for semi-recessed washbasins� Long lever
250mm for countertop washbasins�
• Suitable for people with reduced mobility�
• 10-year warranty�
BINOPTIC MIX mixer
Mains supply
H� 170mm 388MCHLH15
H� 250mm 398MCHLH15
Battery-operated
H� 170mm 488MCHLH15 250
H� 250mm 498MCHLH15 170
BINOPTIC tap
175
Mains supply 110x75x40 185
H� 170mm 38801515 30 max 110x75x40 30 max
H� 250mm 39801515
420
Battery-operated 420
H� 170mm 48801515
H� 250mm 49801515
We recommend installing a TMV for taps Ø15
Option: factory pre-set at 1�4 lpm for environmental labels Ø15
(add "LD" after the reference)
388MCHLH15 49801515
Hand washing and disinfection 13